TEC200 Temporary glass break protection
The TEC200 applied on both sides of your glazing is particularly used to secure damaged glazing which represents a danger before being replaced. This protective film forms a whole membrane over the entire surface thus holding the glass in place. It is characterized both by its ease of laying through a dry application and by its total transparency.
| Material | PET |
| Adhesive | Polymer acrylic 25G/m² |
| Liner | PET siliconé 23 microns |
| Thickness | 100 microns |
| Application Face | Internal & external |
| Fire rating | B-S1, D0 |
| Application T° | Min. +5°C |
| Guarantee | |
| UVA transmission | 5% |
The glass surface to be glued on has to be free from dust, grease or other contaminants. Some specific materials such as polycarbonate can cause air bubble problems. Therefore, a compatibility rest is recommended. Please refer to our prescription table or contact us for any question
Before applying to our users to ensure that the film is suitable for the intended use and comply with current standards. In order to constantly improve our production we may change a product colour and manufacturing process without prior notice.
